TB135 Features
- Tilt-up operators compartment
- Low and high range travel speeds
- Control pattern selector valve
- Emergency engine shutdown/idle system
- Electronic engine monitoring system
- Variable displacement axial piston hydraulic pumps
- Two-speed travel with automatic shift down
- Precise response, proportional main control valves
- Simultaneous operation of cab swing and two digging
functions with no reduction in working speed
- Straight travel with simultaneous operation of digging
and swing functions
- Cushioned main boom, arm and swing cylinders
- Two-way auxiliary hydraulics plumbed to dipper arm
- Hydraulic oil cooler
- One touch engine decelerator
- TOPS/FOPS certified 4-post canopy
- Six-way adjustable suspension seat with retractable
seatbelt
- Spring applied hydraulically released disc type parking
brakes
- Vandalism protected lockable fuel tank and engine
compartment
- Travel alarm
- Two front mounted work lights
- Electrohydraulic auxiliary hydraulic controls located
in left-hand joystick
- Uncluttered operators platform with hand and foot
operated travel controls
- Safety lockout lever for travel and operating controls
- Cast iron, wrap around counterweight
- Double flanged track rollers
- Half-pitch rubber tracks
- Low noise level and EPA exhaust emission compliant
engine
- Automatic fuel bleed system
- Hydraulic and fuel sight gauges
- Protective routing of bucket and arm cylinder hydraulic
hoses
- Main boom cylinder guard
- Remote lubrication system for slew and boom swing
cylinder
- Lockable operators manual and tool storage compartments
- Pilot operated joystick controls with armrest
- Optional steel tracks
- Optional Isolation mounted TOPS/FOPS cab with air
conditioning, heater/defroster, windshield wiper and washer, AM/FM
cassette radio, retractable front windshield and removable lower
section
TB135 Specifications:
|
MACHINE
SPECIFICATIONS — TB135 |
|
|
DIMENSIONS & WEIGHT |
LIFT CAPACITIES (lbs.) at 9'10" RADIUS |
|
Operating Weight (lbs.) |
7606 |
over front, blade down |
over side |
|
Length (transport) |
16'7" |
6.6 ft. |
1512 |
1512 |
|
Width |
5'4" |
Ground level |
2581 |
1505 |
|
Height |
8'0" |
-3.3 ft. |
2603 |
1485 |
|
Ground Clearance |
11.6" |
UNDERCARRIAGE |
|
Min. Front Swing Radius (80o boom swing) |
5'0" |
Traction Motor |
Axial Piston |
|
Tail Swing Radius |
4'7" |
Traction Drive |
Planetary |
|
Dozer Blade (w/h) |
5'4" / 16" |
Traction Force (lbs.) |
7798 |
|
ENGINE |
Traction Brake |
Disc |
|
Make/Model |
Yanmar 3TNV88-QTB |
Track Rollers (per side) |
4 |
|
Horsepower/RPM (SAE 1349 gross) |
27.8/2300 |
Carrier Roller (per side) |
1 |
|
Maximum Torque (ft.-lb./rpm) |
79/1400 |
Track Type |
Rubber |
|
Cylinders/CID |
3/100 |
Track Width |
14" |
|
Fuel Consumption (65% of full load) gal./hr. |
1.0 |
Ground Contact Length |
5'5" |
|
Electrical System (volt/amp) |
12/40 |
Ground Pressure (psi) |
3.9 |
|
SWING SYSTEM |
Travel Speed (mph) |
1.7/3.0 |
|
Independent Boom Swing Angle (L/R) |
80o/60o |
Maximum Gradeability |
30o |
|
Swing Speed (RPM) |
9.2 |
HYDRAULIC SYSTEM |
|
Swing Motor |
Axial Piston |
System Operating Pressure (psi) |
3000 |
|
Swing Reduction |
Planetary |
Pump Type |
2 piston/2 gear |
|
Swing Brake |
Disc |
Hydraulic Flow (gpm) |
9.9 x 2/5.8 x 1/2.7 x 1 |
|
OPERATING INFORMATION |
Auxiliary Flow (gpm) |
15.6 |
|
Max. Dig Depth |
11'2" |
CAPACITIES |
|
Max. Dump Height |
12'6" |
Hydraulic System (gal.) |
22.5 |
|
Max. Dig Height |
17'1" |
Fuel Tank (gal.) |
13.5 |
|
Max. Reach at Ground Level |
17'6" |
Engine Lubrication (qt.) |
5.1 |
|
Max. Vertical Dig Depth |
8'7" |
Cooling System (qt.) |
5.7 |
|
Max. Dig. Depth w/ 2 ft. Flat Bottom |
11'1" |
Final Drives (qt.) each |
0.6 |
|
Max. Dig. Depth w/ 8 ft. Flat Bottom |
9'10" |
|
|
Max. Bucket Dig Force (lbs.) |
8422 |
|
Max. Arm Dig Force (lbs.) |
3536 |
In accordance with our
established policy of continued product improvement, specifications and
features are subject to change without notice. Specifications are for a
rubber track canopy version TB135.
|
